Main Article Content

Adham Ahmed Dalaf
Maki Haj Zidan
Aadel A. Al-Kumait


Abstract





ndirect evaporative cooling is one of the technologies currently used to build highly efficient air conditioning systems and low power consumption. A computer program was created to predict the effectiveness of an indirect-evaporation cooling system which operates based on Maisotsenko cycle (M-cycle) to determine the environmental conditions and proper system design. Several variables that affect the performance of the system have been studied; the amount of volumetric flow of air ranged from (1050 cfm) to (1550 cfm) for the dry side, and changing from 700 cfm to 1200 cfm from the wet side. With respect to design variables, the length of the channel changed from 50 cm to 100 cm. For environmental variables, the effect of changes in dry and wet temperature on system performance had been studied. The experiment was conducted in mid-June over 24 hours. The results showed that the best air supply provided for the best performance of the system is (1050cfm) for the dry side, while the wet side was (900 cfm), when the length of the channel is 80 cm. The results showed the possibility of applying this system in (Tikrit) because it is characterized by its hot and dry climate in the summer, as evaporative cooling efficiency increases in hot, dry climates


© 2018 JASET, International Scholars and Researchers Association





Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Article Details

How to Cite
1.
Dalaf AA, Zidan MH, Al-Kumait AA. Improving the Behavior of Indirect Evaporative Cooler*. j. adv. sci. eng. technol. [Internet]. 2021 Dec. 26 [cited 2025 Oct. 20];1(3):11-7. Available from: https://www.jasetj.com/index.php/jaset/article/view/46
Section
Articles

References

J.-C. Han,"Fundamental gas turbine heat transfer," Journal of thermal science and engineering applicati -ons, vol. 5, p. 021007, 2013. DOI: https://doi.org/10.1115/1.4023826

Y. Xuan, F. Xiao, X. Niu, X. Huang, and S. Wang, "Research and applic -ation of evaporative cooling in China: A review (I)–Research," Renewable and Sustainable Energy Reviews, vol. 16, pp. 3535-3546, 2012. DOI: https://doi.org/10.1016/j.rser.2012.01.052

T. Pistochini and M. Modera, "Water- use efficiency for alternative cooling other variables (w = 2 cm 0.5 cm Qwet = 1000 cfm).

l=80 cm H= technologies in arid climates," Energy and Buildings, vol. 43, pp. 631-638, 2011. DOI: https://doi.org/10.1016/j.enbuild.2010.11.004

G. Heidarinejad, M. Bozorgmehr, S. Delfani, and J. Esmaeelian, "Experi -mental investigation of two-stage indirect/direct evaporative cooling system in various climatic conditions," Building and Environ -ment, vol. 44, pp. 2073-2079 , 2009. DOI: https://doi.org/10.1016/j.buildenv.2009.02.017

E. D. Rogdakis, I. P. Koronaki, and D. N. Tertipis, "Experimental and computational evaluation of a Maisotsenko evaporative cooler at Greek climate," Energy and Buildings,vol.70, pp. 497-506, 2014. DOI: https://doi.org/10.1016/j.enbuild.2013.10.013

B. Riangvilaikul and S. Kumar, "An experimental study of a novel dew point evaporative cooling system," Energy and Buildings, vol. 42, pp. 637-644, 2010. [7]X.Zhao,J.Li,and S.Riffat, "Numeri -cal study of a novel counter-flow heat and mass exchanger for dew point evaporative cooling," Applied Thermal Engineering, vol. 28, pp. 1942-1951, 2008. DOI: https://doi.org/10.1016/j.enbuild.2009.10.034

V. Maisotsenko, L. E. Gillan, T. L. Heaton, and A. D. Gillan, “Method and plate apparatus for dew point evaporative cooler,” U.S. Patent US6581402 B2, Jun 24, 2003.

H. Caliskan,A.Hepbasli,I.Dincer, and V. Maisotsenko,"Thermodynam -ic performance assessment of a nov -el air cooling cycle: Maisotsenko cycle,"international journal of refrig - eration, vol. 34, pp. 980-990, 2011. DOI: https://doi.org/10.1016/j.ijrefrig.2011.02.001

D. Pescod, "Unit air cooler using plastic heat exchanger with evapora - tively cooled plates," Australian refrigeration, Air conditioning and heating, vol. 22, pp. 22-26, 1968.

R.K.Shah, and D. P Sekulic, ''Fundamentals of heat exchanger design,'' New Jersey, USA: John Wiley & Sons, Inc. (2003). DOI: https://doi.org/10.1002/9780470172605

R. K. Shah, and D. P Sekulic, ''Fundamentals of heat exchanger design,'' New Jersey, USA: John Wiley & Sons, Inc. (2003).

K.A.Al-Joudi,''Principles of Air Cond itioning and Crystallization Engineering.Iraq,'' University House for printing, publishing and transl -ation of the University of Basra. (1986).

Internet Source, https://www. engineeringtoolbox. com/evaporation- water-surface- d_690. html